Our High-Performance Brake Oil has been specially formulated to provide the highest performance under the worlds toughest racing conditions, where braking systems must operate at very high temperatures. - Ultra-high 'class-leading' 327°C dry boiling point - Compatible with Dot 5.1 systems - Reduces lever fade and brake pump - For unrivaled braking performance
- Advanced fluor-polymer polish and protectant - Removes imperfections and fills minor scratches - 3 wax blend for long lasting, ultra deep shine - Clear coat safe, no powdery white residue
RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid
$5.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Additionally, it's very slick and tough and lasts as much as five times longer than petroleum grease.
Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.
Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!
$14.99 - $19.99
- Specially formulated to remove heavy chain grime quickly and safely - Leave the chain contaminant free - Chain cleaner spray uses advanced solvents to cut through dirt and grease quickly and effectively
$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$12.00 - $18.50
The Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt, allowing it to be easily wiped or rinsed away, leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC. 16X concentrate options replace ready-to-use gallons and offer great value, reduction in packaging, and reduced shipping costs. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC
$10.00 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
- Foil sealed bottles to ensure freshness of fluid
- Prevents and stops corrosion on metal surfaces and batteries - Ideal for protecting battery terminals and casings - Resistant to hot, cold and salt water - Use after washing to drive out excess water - Protection lasts up to 3 months
Problem Solvers Frame Saver aerosol can with spout, 4.75oz. - Tried and true internal rust protection for steel frames - Protect your investment—each application lasts for years - One 4.75-ounch can treats 3 – 5 frames
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water-soluble formula rinses easily leaving surfaces residue-free. - Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration allowing the degreaser to remove contamination from all surfaces of the drivetrain. - Biodegradable, water-soluble formula easily rinses away.
- Superior formulated dot brake fluid for dot 3 and dot 4 applications - Exceeds DOT 5.1 "Silicone" specifications - Synthetic glycol-ether formula will mix with other brake fluids conforming to US FMVSS: Dot 3/4 Requirements - Lasts up to 3 years in high performance conditions
Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.
Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.
Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.
Finish Line WAX Lubricant goes on wet, but dries to a hard, dry, super-slick wax film. No oily greasy film to attract or absorb dust and dirt. DuPont's metal bonding Krytox® lubricating film in combination with M2 molybdenum, specialized waxes, and more, make our WAX Lube even slicker, quieter and longer lasting. WAX Lube requires more frequent application, but your drivetrain will remain nearly contaminant-free, so cleaning before relubing is not usually required. Drivetrain parts that stay this clean last longer and work better! Perfect for cyclists who value cleanliness over all else.
Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect’s incredible water dispersing action! It’s a perfect ‘all over’, after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts and paintwork. It’s ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn’t just disperse water after you’ve given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear and energy consumption. - High performance formula leaves dry, non-sticky protective film - Safe on frame, metal parts, plastics, rubber, paint and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - 500ml Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals & cleats - Incredible durability - Pipette system for easy application
$9.99 - $14.99
- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection
$9.99 - $14.99
- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable
- PTFE additives reduce friction and energy consumption - Waxed based formula reduces metal to metal contact - Excels in dry, dusty conditions - Protects against rust development and corrosion - Prevents chain wear - Does not attract contaminants - Ideal for MTB, Road and Cyclocross - Can be applied to chain, cleats, shifters and derailleurs
Our Water Soluble Degreaser quickly and safely eliminates built-up oil, grease and grime on metal, plastic, rubber and seals. Its unique, biodegradable formula means that after use it can be quickly rinsed away with water to leave your greasy bike parts completely clean. Our R&D team put in the hours to make sure the Water Soluble Degreaser works on even the toughest of grime including waterproof grease and chain lube residue! - Bio Formula easily cuts through tough grease - Can be used on chains, gears, and individual components - Water-soluble formula for easy cleaning - Works on tough waterproof grease and chain lube residue - HazMat item not eligible for air shipment
Finish Line's Extreme Fluoro Grease is made with pure DuPont fluorinated ingredients for outstanding durability and unbeatable smoothness. It's recommended for use on precision parts, especially ceramic and conventional bearings, where you need maximum protection from the elements and heat. This low-friction grease even works great on cable wires, derailleur pivots, stanchions, pedal springs and other vital moving parts.
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
We call it LongLife because this grease delivers the best protection and lifetime for your bearings, even in the most harsh riding conditions. This is the best choice if you spend your time riding your bike in a humid environment and you do not use coated bearings or if your cycling application is an off-road discipline. Be aware that the LongLife grease has a slightly higher friction coefficient than the standard All Round grease. This is a medium-viscosity type of grease, designed to deliver the best performance under the worst riding conditions. The recommended fill rate is 70-100%, depending on the weather conditions and riding application. - For use in CeramicSpeed Wheel Bearings, Bottom Bracket Bearings, and Headset Bearings - 8,000-13,000km or 5,000-8,000 mile average lifespan in clean conditions - 3,000-8,000km or 1,800-5,000 mile average lifespan in wet and harsh conditions - 10ml syringe
CeramicSpeed Time Trial / Track Grease is a great choice when riding short time trials or track, designed to deliver as low friction as possible, thanks to the Dynamic Viscosity Transformation (DVT) technology used in its formula. When the TT Grease lubricating film is subject to the high pressure at the point of contact between the ball and race, the TT Grease instantly changes its state to a lower kinematic viscosity, similar to that of a light oil. The DVT technology provides the best of both worlds for the rider—the low friction properties of a light oil combined with the longevity of a light grease. This grease is ideal for ceramic bearings and is suitable for steel bearings as well. When greasing the bearings, the recommended fill rate on road is 25-30% and on track 15-20%. Re-lubrication is required more frequently when using TT+Track grease. - For use in CeramicSpeed Wheel Bearings and Bottom Bracket Bearings - 1,000-2,000km or 600-1,200 miles optimal efficiency - Developed exclusively for performance—no protection benefit - 10ml syringe
$9.99 - $13.99
- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal to metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency
Tri-Flow Foaming Lubricant helps penetrate and protect bearings, chains and cables. - Foaming action helps cling to vertical or horizontal surfaces - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
Tri-Flow Red Grease is a premium quality, extreme pressure, multi-purpose aluminum complex grease. It features outstanding performance in high temperature applications and is waterproof. - For use on hubs and headset bearings
HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
$9.99 - $12.99
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Muc-Off Sweat Protect uses state of the art anti-corrosion additives and inhibitors to provide class leading protection against corrosion. It drives out moisture and leaves a protective anti-corrosive layer on your bike’s frame, metal parts, and paintwork to keep the harmful effects of moisture and sweat at bay. - For use all over indoor trainers and all gym equipment - Non-drying film - Rust preventing / anti corrosion - Integral tracer dye that shows under UV light– aids accurate application to ensure total protection - Protection lasts up to 3 months - Mask braking surfaces before application. Store in a cool, dry place. Do not apply to tyre tread or braking surfaces
Formulated with Pedro's exclusive CleanTech Chemistry, Enduro Pemium Wet Lube blends advanced wet and dry lube technology for incredible wet lube performance in mixed to wet conditions, without the mess. Noticeably elevates efficiency, runs quiet, reduces wear, long-lasting, and fully water-proof. - Extreme lasting performance with less mess in mixed to wet conditions - Elevates efficiency, runs quiet, reduces wear, and fully waterproof - Safe plant-based ingredients
Formulated with Pedro's exclusive CleanTech Chemistry, Slick Wax blends advanced wax and polymer technology for maximum cleanliness and elevated efficiency in dry and dusty conditions. Runs quiet, reduces wear, long-lasting, and repels water, dust, and grime. - Incredibly clean and efficient in dry and dusty conditions - Runs quiet, long-lasting, and repels water, dust, and grime - Safe plant-based ingredients
$7.00 - $12.00
SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.
SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.
Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.
Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!
- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air
- Highly effective foam cleaner which is ideal for helmet liners, pads, gloves, shoes, body armors or any soft material which comes into contact with the rider - Instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh citric burst fragrance
- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent
Tri-Flow Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil. - Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance - Quick evaporation technology leaves no residue and needs no rinsing - Biodegradable formula
$8.00 - $11.50
Developed specifically for Pedro's grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC. - Makes drivetrain cleaning quick, easy, and safe. Perfect in the Chain Pig! - Incredibly effective pre-activated formula quickly removes oils, soils, and grime - Safe on any material, biodegradable, solvent-free, plant-derived, and zero-VOC
We focused on maximizing your performance and the longevity of your CeramicSpeed Pulley Wheels when we designed the special oil for pulley maintenance. Remember to add oil on the outside of the bearing seal after riding in wet conditions or washing your bike. If you are riding in harsh and wet conditions, we recommend that you choose the All Round Grease instead and grease your bearings from time to time. When using the oil for maintenance, the recommended dose is 1-2 drops. Remember that the OSPW System has two lubrication points on the back cage plate to facilitate this process.
• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.
- All purpose waterproof synthetic grease with teflon - Clear formulation for quick/Easy contamination identification - Fits dualco-Style grease gun heads
Designed for mixed to wet conditions, Chainj is an advanced biodegradable vegetable/synthetic oil blend engineered to provide superior efficiency, wear protection, and durability. The vegetable oil is not only sustainable but also associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Chainj features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too! - Dissolves and isolates dirt for lasting performance in mixed conditions - Superior durability, wear protection and lubrication - Biodegradable, non-toxic, vegetable/synthetic formula
A premium, all-purpose, NLGI #1.5, extreme pressure, synthetic lithium bicycle grease that meets tough GC-LB bearing performance requirements. This rating means Syn Grease Plus will provide the absolute highest performance and protection for your most critical bearing applications. Syn Grease Plus is also fantastic for assembly tasks, threads, and component interfaces, formulated to have an excellent dropping point, superior water resistance, and outstanding structural stability over an extremely wide range of temperatures. Syn Grease Plus is the grease of choice for those that demand the best. - Premium, all-purpose, NLGI #2, GC-LB rated, extreme pressure, synthetic, lithium bicycle grease - Formulated for excellent oxidative stability, superior corrosion protection, and extreme pressure/anti-wear protection - Provides the absolute highest performance and protection for your most critical bearing applications
Syn Lube is formulated with extreme pressure additives, corrosion inhibitors, and tackifiers to provide incredible wear protection, lubrication, and staying power in extreme wet and muddy conditions. - The original synthetic chain lube formulated specifically for mountain bikes - Superior wear protection, efficiency and durability for extreme conditions/mileage - Unique detergents break down and isolate dirt protecting the surfaces of your chain
WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.
WD-40's Wet Lube is the perfect bicycle lubricant for riding in wet and muddy conditions. Their exclusive formula has been tested and proven by mechanics and cyclists and is amped up for premium lubrication. Wet Lube improves shifting and extends the life of your chain and drivetrain components by repelling moisture and gunk.
Page 1 of 3 Next page