Shoes

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Specifically designed for gravel rides and long hours of cycling on terrain full of surprises, the Sidi Gravel shoe offers comfort and stability on road and off. -The Tecno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -All new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -Polyurethane shock absorber with inner padding designed to protect your feet -The reinforced heel cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -Provides additional foot protection in the event of a crash -The Sidi MTB Competition Sole has been specifically designed for gravel biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

The X-Alp Summit is a great shoe for all-day mountain bike adventures. Fully redesigned from the ground-up, the X-Alp Summit shoe receives trickle-down technology from our flagship X-Elevate trail shoe, including a Nylon composite sole that balances pedaling efficiency with walkability and a Grippy Vibram ECOSTEP rubber outsole that will help you navigate the gnarliest hike-a-bike sections. An L6 BOA Fit System works alongside the Velcro toe strap to provide a comfortable, secure fit. The synthetic leather upper features a plethora of perforations to improve ventilation and allow your feet to dry out after creek crossings. Mountain biking can be rough work, so we reinforced the toe box to ward off rock strikes. - BOA Fit System with L6 dial for a secure, comfortable fit - Seamless, perforated synthetic upper for comfort and breathability - Reinforced toe box provides impact protection - Grippy Vibram ECOSTEP rubber outsole - EVA heel cushioning increases comfort and walkability - 2-bolt SPD cleat compatible

Windproof cycling shoe covers. When the mercury really drops, keep your toes toasty with our windproof and warm Blitzen cycling shoe covers. The windproof outer layer takes the bite out of the wind and the neoprene inner layer holds in the heat.

Designed specifically for cool and wet conditions, Ragnarök provides a high level of water resistance, moisture regulation, and comfort in a performance cycling shoe. Constructed with a BOA closure, waterproof membrane, and rubberized shell that extends above the ankle, Ragnarök delivers unrivaled weather protection in the wettest and muddiest of conditions. - Hook-and-loop neoprene ankle - BOA closure with IP1 low power reel - Works with 2-bolt mountain compatible cleats - Black finish - 25ºF+ / -3ºC+ Comfort

Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

Ragnarök BOA® boots are perfect for the hard-to-predict weather of late fall and early spring. Built to block cold and moisture, these lightweight cycling boots feature a 25ºF+ (-4ºC+) comfort range to keep feet warm and dry through the chill of late autumn and early spring rides. - Free cleat plates for flat-pedal use are available upon request. Please contact brand support at info@45nrth.com - Rated for 25ºF+ (-4ºC+) comfort - Waterproof breathable membrane to manage moisture - Neoprene ankle cuff to keep out moisture and road grit - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Real-rubber outsole with added grip for slippery surfaces - 2-bolt cleat mount ANTI-SLIP MICROGLASS RUBBER A rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors. WATERPROOF-BREATHABLE MEMBRANE An ultra-thin sheet of microporous material behind our textile shells keeps you dry and warm in the harshest weather conditions. Our waterproof, breathable membranes stop liquid from the outside, but release vapor from the inside for thermal and moisture regulation. BOA CLOSURE Micro-adjustable BOA closure for perfectly dialed fit. LOW CUT NEOPRENE ANKLE Secure closure provides warmth and protection from the elements.

The Stylus features our premium Synchwire single-layer upper that conforms to the foot and provides phenomenal structural support and ventilation. Three compression-molded Velcro straps provide tried and true tightening to create a comfortable, supportive fit. Our injection-molded nylon and glass fiber outsole, with over-molded heel and toe pads plus a universal 3/2 cleat bolt pattern that give you the power and versatility you need to get the most out of every ride. Upper: - Synchwire one-piece composite upper - Laser-cut venting - Three compression-molded Velcro straps - Reflective rear tab logos and graphics Outsole: - Injection-molded nylon and glass fiber outsole - Universal cleat mount (2- or 3-bolt) - Over-molded TPU toe and heel pads Footbed: - Die-cut EVA insole Weight: - 272 grams (size 42)

The shoe that offers the best for everyone. Whether racing or a casual ride, the Sidi Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad

The adidas Five Ten Freerider Canvas Mountain Bike Shoes are as street friendly as they are capable on the bike. A Dotty tread with Stealth S1 rubber sets you up for flat pedal control and bike-worthy durability sets you up for the trail. All with a fit and feel that sets the bar for versatile wear on and off the bike. - Lace closure - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester - Canvas upper - Textile lining - Reinforced toe - Stealth S1 rubber outsole

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

The adidas Five Ten Freerider Canvas Mountain Bike Shoes are as street friendly as they are capable on the bike. A Dotty tread with Stealth S1 rubber sets you up for flat pedal control and bike-worthy durability sets you up for the trail. All with a fit and feel that sets the bar for versatile wear on and off the bike. - Lace closure - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester - Canvas upper - Textile lining - Reinforced toe - Stealth S1 rubber outsole

All-day comfort on and off the mountain. The Five Ten Freerider Pro BOA shoes feature a BOA closure for a secure fit and easy adjustments. With their impact-resistant toe box, medium-stiff build, and signature sticky rubber, these shoes offer exceptional grip and durability for all-mountain and enduro riding. Their casual design also makes them suitable for wear off the bike. - High abrasion resistant materials provide durability where needed - Reinforced toe cap - Provides optimal traction - Stealth S1 rubber outsole for unbeatable grip.

Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use -The Aerolite sole is designed to maximize aerodynamics and power transmission -The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort -The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike

The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking

The Sidi MTB Speed 2 is a fast, efficient and durable shoe tested for the most difficult off road terrain. The ease of adjustment and clean design make it reliable and intuitive to use. -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB Competition Sole has been specifically designed for mountain biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped to reduce heel slip and increase power transfer

The Sidi technology used for mountain biking is applied to the gravel discipline. The Sidi Dust Shoelace is a rigid high performance shoe with a tried and true closure design, technologically advanced and reliable. -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged and strenuous use -Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling -The Sidi MTB SR17 sole represents the ideal balance of stiffness for efficient power transfer and flexibility for walking -The toe inserts are easily replaceable and offers the possibility to mount spikes for particularly muddy rides

Whatever the journey, the Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets the Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support The Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke

The Sidi Wire 2S Road Shoes are engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort

Drako 2S SRS is designed for athletes looking for maximum foot stability to unleash all their power. The ventilated carbon sole, with the innovative Firmor Lateral Support System, combines efficient power transfer with superb lateral stabilization of the foot. The dual rotor closure allows for a perfect individual fit, with added protection from mud and debris -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The central mounted Single Techno-3 Push mechanism guarantees balanced fit for every type of instep -Techno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel doesn't slide out during steep climbs or sprints -Each side of the heel can be adjusted independently, for a perfect fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB plate are easily removable and replaceable