This derailleur not only answers the Eagle drivetrain’s need for greater capacity, but is also the next evolution of SRAM's proven, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley, allows 10- to 50-tooth cassette capacity in this compact design, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. A redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability.
$85.00 - $99.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
$47.99 - $53.99
Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.
$48.99 - $75.00
If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.
$29.99 - $30.99
- Enhanced Stability, Maneuverability And Shifting Efficiency - New Side Swing Design For Large Wheel Bikes - Efficient Cable Routing For Light Shift Operation - Sophisticated Chain Guide For 2X11-Speed Fcw New Spike Construction Gears - Versatile Specification Compatible With Traditional Mounting Options - Wider Clearance For Large Wheels - Compatible With Shorter Chain Stays - 50% More Shifting Power (Outward) (Vs. Current Xt, Fd-M7020 Only) - Increased Traction Range For Long-Travel And Active Rear Suspension - Series: SLX - Swing Action: Side Swing - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 136g - Clamp diameter: 34.9 w/included shims
- EPS specific front derailleur nut and washer
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
$38.99 - $40.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
$49.99 - $50.00
Shimano's SLX FD-M670 Front Derailleur is made for long-travel, all-mountain bikes with a triple-ring set up. The compact cage design gives you improved rear tire clearance while the matched radius reduces chain drop. It's a top-swing, dual-pull derailleur, great for full suspension bikes and 29ers. It's super stiff for the quick, authoritative shifts that serious mountain bikes demand.
SRAM's Apex Rear Derailleur features cold-forged aluminum construction for sweet shifting, dependability and low weight. Designed for SRAM's 10-speed road drivetrains and featuring their Exact Actuation Technology, Apex will provide you with perfect shifting every time.
SRAM's X5 2x10 Front Derailleur is made from chrome-plated steel with a forged aluminum clamp for strength and precision. It provides crisp action for fast, smooth, and reliable shifting season in and season out.
Incredibly fast, astonishingly quiet, and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 180 grams.
$66.00 - $75.00
SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.
The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system
$38.99 - $40.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.
Shimano's Alivio Front Derailleur features wide pivots and a rigid cage for fast shifting and trail-worthy durability. This 9-speed compatible derailleur also gives you clearance for mud guards or wide tires.
Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9
Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69
$29.99 - $30.99
- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g
$31.99 - $39.99
Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.
$10.20 - $11.95
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
Shimano's SLX Front Derailleur is made for long-travel, all-mountain bikes with a double ring set up. The compact cage design gives you improved rear tire clearance while the matched radius reduces chain drop. It's super stiff for the quick, authoritative shifts that serious mountain bikes demand. This E-Type derailleur mounts directly to your bottom bracket.
SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.
For unrivaled shifting, upgrade to SRAM's Rival Front Derailleur. Because consistency equals victory, Rival boasts lightweight and durable cold-forged-aluminum construction plus SRAM's Exact Actuation Technology for awesome shifting every time. The Rival shifts beautifully on standard and compact cranksets, too.
Shimano Tourney TX is a basic 8-speed rear derailleur for entry-level sport bikes and riders. Enjoy durable, trouble free, and stable performance. - Maximum cog size: 34t - Total capacity: 43t
$26.99 - $28.99
Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed
$90.99 - $96.99
Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)
Page 1 of 6 Next page