Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
$18.00
Protects Cane Creek Thudbuster moving parts from grit and grime.
- Neoprene construction
$24.00 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert - X-Soft
$29.99
ViscoSet offers viscous damping to make bicycles safer by inhibiting the uncontrolled steering oscillation known as speed wobble. Speed wobbles are vibrations that start small and get worse due to harmonics. This frightening shimmy can affect the handling of any bicycle under certain conditions and is the result of many different factors.
$5.00
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
- Allows the installation of a straight steerer fork without changing out the headset lower
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek
Cane Creek Progressive Rate VALT Lightweight Rear Shock Spring - 55mm x 450-550lbs, White
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek LT G4 Elastomer Insert - Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert - X-Firm
$21.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$99.99
The performance of your shock is directly related to the quality of your spring. VALT springs offer a significant weight reduction over standard steel springs. Riders can enjoy the performance benefits of coil shocks without the weight penalty.
Progressive-Rate VALT coil springs are designed and tuned by Cane Creek's engineering team to provide riders with a true rise-in-rate spring curve. The Progressive-Rate VALT springs maintain the sensitivity and "set it and forget it" mentality of a traditional coil set up, but with the progressiveness and ramp up that hard-charging riders and many frame designs demand. Progression begins at 50% into the stroke of the spring.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$10.99 - $11.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Cane Creek eeSilk Elastomer 3 - 50 Durometer, Soft
$13.99
Cane Creek crown races are interchangeable between headset series.
- Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames
- May be required to fit Manitou Mastodon Mukluk Carbon frames
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 47mm lower headset bearings
- Compatible with 33mm (1-1/4") tapered steerer tubes
- Lightweight aluminum construction
$8.99
Thudbuster 3G Elastomer
$13.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Cane Creek eeSilk+ Elastomer 1 - 40 Durometer, X-Soft
$15.99
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
$15.30 - $39.00
Bearings for Cane Creek AER headsets.
- Aluminum Bearing
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower
$29.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
Page 1 of 3
Next page