Brakes/Levers/Pads

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear pull or mechanical disc brakes. They are super easy to install and adjust-so you can dial in the modulation just the way you like. - All levers are compatible with mechanical disc brakes and linear-pull brakes. - Reversible - Reach Adjust and Speed Dial Leverage Adjust

With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear pull or mechanical disc brakes. They are super easy to install and adjust-so you can dial in the modulation just the way you like. - All levers are compatible with mechanical disc brakes and linear-pull brakes. - Reversible - Reach Adjust and Speed Dial Leverage Adjust

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. Features - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes

SRAM's full-powered Code brake now features technology to improve your cockpit aesthetic: Stealth. The lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. The proven internals remain the same, with SwingLink driving the signature feel. And for unrivaled ease of customization, Code Silver Stealth features Tool-free Reach and Contact Point Adjust. Confidence is king, and Code Silver Stealth reigns supreme on the slew of more-capable-than-ever-before trail bikes, as well as heavy-duty giants like enduro, gravity, and E-MTB. - Stealth lever body with pivot bearing and forged aluminum blade designed to complement SRAM's AXS cockpit - SwingLink technology with custom designed cam shape helps reduce deadband with increasing progressive power throughout a pull - Tool-free reach adjust provides customized hand fitment - Contact point adjustment allows you to choose when to engage - Durable 2-pc forged aluminum 4-piston caliper with stainless steel hardware for corrosion resistance - Bleeding Edge technology matches the bleed port to ensure proper syringe engagement and reducing contamination - Steel-backed metallic sintered pads come standard for more power and longer wear - Includes MMX clamp

SRAM Rival disc brake caliper. Caliper only - does not include lever or hoses. - Includes steel-backed organic pads - Steel-back organic brake pads included - Flat Mount 20mm offset

Level Silver Stealth features SRAM's Stealth lever body provides you with one of the lightest, sleekest brakes in the market. Featuring the power to weight performance that you expect from Level with a new lever design purpose made to create a clean, fast looking cockpit. The tool-free Reach adjust is quick and easy, while Lever Pivot Bearing technologies ensure smooth, fatigue-free action. - Stealth lever body with pivot bearing and aluminum blade designed to complement SRAM's AXS cockpit - Tool-free reach adjust provides customized hand fitment - Durable 2-pc forged aluminum 2-piston caliper with stainless steel hardware for corrosion resistance - Bleeding Edge technology matches the bleed port to ensure proper syringe engagement and reducing contamination - Steel-backed organic pads come standard for reliability - Includes MMX clamp - Rotor and bracket sold separately - 950mm brake hose

Just because you eschew gears doesn't mean you're willing to settle for heavy, retro brake levers. Welcome to single speed paradise with SRAM's 900 Single Speed Brake Levers. The unidirectional carbon levers are impressively light and SRAM's renowned ergonomic hoods are always comfy. Set up your single speed rig right with SRAM's 900 brake levers.

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

SRAM's right-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group offer precise braking performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM's Rival 22 right shifter is designed to work with a SRAM 11-speed cassette. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again!

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. Mated to a HYDROR brake lever is a DoubleTap 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride. - SRAM Road ExactActuation 11-speed compatible - Uses DOT 5.1 brake fluid - Caliper available in both 74mm and Flat Mount versions - Lever body design offers excellent finger wrap, comfort and control - Easily converts between 160mm and 140mm rotors with adaptor brackets - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

- Available for carbon and aluminum - Easy to replace and service - Wear evenly and maximizes braking power - Pad Material (RB): Rubber - Type (RB Pads): Road/CX - Rim Compatibility (RB): Carbon - 2 Pack

SRAM Level disc brake caliper assemblies. 2-piston caliper

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.