Front

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included

For smooth downshifts and fast upshifts, SRAM's Apex Front Derailleur is engineered for success. Its aluminum body is light as a feather while its steel cage is stiff for precision shifts everytime. The Apex Front Derailleur shifts great on standard and compact cranksets, too.

Shimano's SLX FD-M670 Front Derailleur is made for long-travel, all-mountain bikes with a triple-ring set up. The compact cage design gives you improved rear tire clearance while the matched radius reduces chain drop. It's a top-swing, dual-pull derailleur, great for full suspension bikes and 29ers. It's super stiff for the quick, authoritative shifts that serious mountain bikes demand.

Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.

Shimano's SLX Front Derailleur is made for long-travel, all-mountain bikes with a double ring set up. The compact cage design gives you improved rear tire clearance while the matched radius reduces chain drop. It's super stiff for the quick, authoritative shifts that serious mountain bikes demand. This E-Type derailleur mounts directly to your bottom bracket.

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

SRAM's X5 2x10 Front Derailleur is made from chrome-plated steel with a forged aluminum clamp for strength and precision. It provides crisp action for fast, smooth, and reliable shifting season in and season out.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48

- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs

K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

For unrivaled shifting, upgrade to SRAM's Rival Front Derailleur. Because consistency equals victory, Rival boasts lightweight and durable cold-forged-aluminum construction plus SRAM's Exact Actuation Technology for awesome shifting every time. The Rival shifts beautifully on standard and compact cranksets, too.

The Shimano GRX RX-810-F front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. The RX-810-F also accommodates a 17T front chainring range for wider gearing options. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - 17T front range - More cable routing options - Lighter front shifting - Wider tire clearance - Wider range front gearing - Precise and easy front derailleur adjustment

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes