Seat Bags

Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.

The Dual is small enough to nestle under a seat without scraping against your thigh, yet it's big enough to hold two 700C tubes and two CO2 cartridges, plus an inflator. So, why two spare tubes? Because you never know what's up the road, and it's nice to know that you're prepared. That extra tube will make the rest of your ride that much more enjoyable knowing that you won't have to use your cell phone if another flat occurs. - 27 cubic in.

The Tubi is sized for tubular or "sew-up" tires. The Tubi has a side pocket if you prefer to separate your money, I.D. or keys. It's skinny, so as not to touch you or your expensive Euro shorts. - 45 cubic in.

Pico, Medio and Gordo are our water, resistant extra durable range of Arundel seat bags. We make use of sonic welded seams and nylon fabric impregnated with thermoplastic polyurethane. Think frogman raft. The straps are also nylon and wider than usual, like seat belts in planes and cars. A wider strap means more Velcro area for better security. The materials we used cost more but in exchange, you have a seat bag that should last a good long time. All three are slightly roomier than our time proven corresponding sized Uno, Dual and Tubi. Medio - 33 cubic in, 5 X 3 3/4 X 2 in - Sonic welded seams - Wide 1 1/2 in nylon strap with extra Velcro - Fits an MTB tube or two 700c gravel tubes, plus gas, filler etc.

Just the basics. No more, no less. A tiny bag with big potential. Together with tough materials, an internal pocket and a built in light loop the Grid MTB is large enough to fit an MTB tube or a multi-tool, 2 tire levers and a CO2 inflator. - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 14oz/0.4L/24cu in. capacity - Welded seam construction - Hook and loop attachment - Weight: 31 grams

Together with tough materials, an internal pocket, and Blackburn's built-in reflectivity, the Grid Small is perfect for road cyclists. The Grid Small is big enough to fit a road tube, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Tail Light Loop - Water Resistant Zippers - Retro Reflective Material - Robust, Abrasion-Resistant Outer - .45 Liter capacity - Weight: 55g

Get your payload out of your jersey and under the seat! Built with tough materials, an internal pocket, and retro reflective technology, the Grid Medium seat bag is big enough to fit 2 road tubes, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Fully reflective side panels - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 21oz/0.6L/36cu in capacity - Welded seam construction - Anti-chafe straps - Weight: 70 grams

Blackburn's biggest seat bag is built to bring it all with you. The Grid Large is spec'd with tough materials, an internal pocket/removeable divider, and is covered with reflective technology. Big enough to fit a jacket or 3 road tubes, a multi-tool, 2 tire levers and a CO2 inflator with a cartridge. A removable divider allows for easy organization. - Reflective material - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 48oz/1.4L/85cu in capacity - Weight: 130g

Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers

The Scape Saddle Pocket Bag is a small, practical 100% waterproof bag for bikepacking or gravel cycling, used as a classic saddle bag or as a versatile pocket bag to attached in multiple ways to the other Scape bags for convenient additional storage space The Scape Saddle Pocket Bag is a small, practical 100% waterproof bag for bikepacking or gravel cycling that attaches in multiple ways. Made from welded construction, waterproof materials and details to protect the bag from tears and abrasions, it additionally uses internal padded foam on both sides to protect your belongings. A coated zipper with auto lock puller runs around the perimeter of the bag for maximum opening and hypalon patches on both sides guarantee protection. Used as a classic saddle bag or as a versatile pocket bag to attached in multiple ways to the other Scape bags for convenient additional storage space.

- Material: water-resistant nylon - Mount: saddle/seatpost - Pockets: 1 internal - Closure: zip

Pack it up. - Contain QR saddle bags offer simple and effective solutions to keep your essentials stored securely and easy to access. Where it thrives - On the bike, out in the elements What it's built for - Convenience, durability Highlights - Quick-Release T-Bracket twists and locks onto saddle rails - Waterproof nylon construction and zippers - Rubberized fabric with a light clip/strap

- Internal elastic pocket - Tail light attachment - Reflective piping - Small: 16 x 7.5 x 9cm - Medium: 19 x 8 x 9cm - Large: 21 x 9 x 9.5cm

- Bungee draw cord on top - Reflective piping - Tail light attachment - 53 x 19 x 18cm

While the Mini Tool Kit is the smallest bag in the Jandd line, it is still made to the same strict specifications as Jandd's largest mountaineering pack. - Perfect for minimalists; fits tube, tire levers and mini-tool - Three-point retention system - Main panel is doubled with an extra layer of nylon to prevent premature wear at the seat post - Seams are fully taped to prevent fraying - Made of Dupont Cordura - Weight: 40 grams - Capacity: 24 cubic inches

Lezyne's Roll Caddy features a simple roll-up design constructed of a durable nylon fabric for your daily ride necessities. Strap it to your saddle rails or toss it in your pack. The large, adjustable nylon strap slides easily to secure and accommodate what's inside, and the wide open pockets can fit a 29" tube or a pair of tire levers. The Roll Caddy has an internal zipper pocket to secure your small items.

Lezyne's Road Caddy is a compact seatbag made of durable nylon fabrics that tucks nicely under your saddle. A large nylon strap secures the caddy to the saddle rails. The Road Caddy features a water resistant zipper with a finger loop, a clamshell design that opens to provide easy access, and an elastomer internal pocket for storage. Reflective logos and a rear light loop aids rider visibility at night.

Lezyne's Ex Caddy is an expandable wedge shaped caddy with a lower portion that unzips when more storage is needed. Labeled internal organizational pockets provide extra organization. A buckle system securely attaches the Caddy to the seatpost and seat rails. Durable woven nylon fabrics, water resistant zippers, reflective logos, and reflective tail light loop make this caddy ready for all weather and nighttime riding.

Lezyne's Stuff Caddy is a simple, versatile Caddy to carry extra "stuff." Quickly and securely mounts to handlebars, frame, and fork, or wherever it’ll strap to. High-quality, durable materials. Adjustable straps increase versatility and an integrated draw cord tightly holds its content. Super-water-resistant construction with reflective features for added safety.

Lezyne's M-Caddy with CO2 Repair Kit is a complete and convenient solution for the rider with speed in mind. It features a Twin Speed Drive CO2 inflator, two 16g CO2 canisters, a RAP 6 multi-tool, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for a competition or any situation where a quick repair and tire inflation is a must.

Lezyne's XL-Caddy is an oversized, high-capacity saddle bag. Large rear opening provides easy access to main compartment. Labeled organizational pockets fit pump, multi-tool, and tire repair necessities. Two quick-access side pockets. Buckle system attaches to saddle rails; dual Velcro straps attach to seat post. Durable woven nylon construction. Reflective logos and loop increases night visibility. Water-resistant zipper with large pull loop.

The perfect balance between lightweight and capacity. Large enough to accommodate a spare inner tube, tire levers, multi-tool, a wallet, and keys. But compact enough for adventure. - Water resistant 1000D material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and Amara leather limit abrasion

The perfect balance between lightweight and capacity. Large enough to accommodate a spare inner tube, tire levers, multi-tool, a wallet, and keys, but compact enough for adventure. - Water resistant 1000d material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and amara leather limit abrasion

Plenty of room and durability to support you on epic rides. If being prepared is important the super cache can carry enough to accompany you on epic rides. - Water resistant 1000D material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and Amara leather limit abrasion

- Water resistant 1000D material with YKK zipper - Interior division for all your essentials - Reflective logo, webbing to clip light - Angled straps achieve a low profile fit - No-snag Velcro and Amara leather limit abrasion - Length: 9 in, Width: 5.1 in, Depth: 3.7 in - Volume: 68.5 cu in

Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes. The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models. Further Features: - PVC-free, polyurethane-coated nylon fabric - No protruding plastic parts on the inside - Includes the mounting bracket - Simple attachment - Reflector

This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.