Lighting

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

A classic bike light with a modern twist, the Classic Drive 500+ front light beams 500 lumens (up to 80 hours of runtime) via a single high-output LED emitter. It's built around a sleep cylindrical housing that offers a compact and lightweight form factor. Its waterproof USB-C charging capability is convenient for recharging(cable not included). The machined aluminum construction ensures durability and efficient heat dissipation. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from six different output modes, from the highly disruptive Daytime Flash mode to the long-lasting 80-hour runtime in Femto Mode. The Infinite Light Power Pack+ compatibility offers versatility and extended runtimes. - Max 500 lumens / 80-hour runtime in Femto mode - Max 500 lumens / 80-hour runtime in Femto mode - Classic Lezyne styling with modern technology - Machined aluminum construction - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

Blinder 1300 Front: A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 1300 lumen road focused beam - Provides quality illumination up to 120m - Industry leading battery tech provides 1.5 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes two mounts; a go-pro style attachment for mounting under a computer and a tough rubber strap for the handlebar. - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility Blinder R-150 Rear: Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility. - Super bright 150 lumen output - A lightweight 48 grams - 9 eye-catching modes - 100% waterproof with IP67 rating - Side illumination via lens geometry - USB rechargeable battery - Integrated USB-A connector (cable-free) - Up to 50 hr runtime - Compatible with standard & aero seat posts - Low battery & charge indicator

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

If you’re looking for a compact urban bike light combo set at a great price, look no farther than this pairing. We’ve teamed up the compact 80 lumen Beamer 80 headlight with the bright and super-efficient Blinky 3 tail light. Both front and rear lights boast generous run times and have all the steady and flashing modes you need to be noticed as you explore by bike after dark. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Blinky 3 specs: - 3 - 5mm LEDs adn built-in parabolic lensing provide steady and flashing modes - FL1 tested Run times: 70 hrs (steady – 12 lm), and up to 140 hrs (flash - 12lm) - Provide 140° of visibility - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts plus rear clip for multiple mounting options - 68 grams

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

The Lezyne STVZO Pro E115 Headlight has a German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens. Durable, heat-dissipating CNC machined aluminum construction. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. - Direct X-Lock and CNC aluminum fork mount - Includes 140cm long power cable

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

- 2 Super bright LED's per light - Easy On/Off - Just push the lens - Weather-tough water resistant design - Universal rubber bracket

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Made for the ultimate road cyclist, the HotrodTM 120 taillight unleashes a powerful 120 lumens of flashing output for unprecedented night and day cycling safety. High-intensity cluster-mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Using Cygolite’s 24/7 Safety Technology® with exclusive solid and flashing modes to increase your safety, the new Hotrod Rear 120 includes new Bzzz Flash mode to stand out even more both day and night. Every bit the road cyclist's tail light, the Hotrod 120 uses a VersatiteTM flexible mount that conveniently attaches to most seat posts including aero styles. Performance - 120 lumen red tail light with 7 lighting modes engineered for road cyclists - Continuous array of LEDs work in unison to shine an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable with 1:15 to 70 hours of run time, and 3 hour recharge time. Technology and Safety - Built-in 24/7 Safety Technology® gives you a powerful selection of 7 night and day modes (DayLightning® High Flash, High Steady, Group Low Steady, SteadyPulse®, Zoom, Bzzz Flash, Low Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Zoom mode signals those around you with a gentle change in brightness - All-new on Hotrod, Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Low battery indicator alerts you when a charge is needed - Light mode memory saves the mode you're in before the light is turned off - VersatiteTM flexible mount conveniently attaches to seat posts including aerobars - Designed, engineered, and assembled in the USA RUN TIMES: - Group (low steady): 70 hr - High Steady: 1:15 hr - Zoom: 5 hr - SteadyPulse®: 5:30 hr - Low Flash: 30 hr - Bzzz Flash: 8 hr - DayLightning® Flash: 3 hr CHARGE TIME: - 3 hrs (depending on the charger used) MOUNTING: - Flexible seat post mount BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 35g *Features and specs are subject to change without notice.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.

The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Mako 200 - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - Run Times: 15:00 – 60:00 hours - 3 light settings—High, Low, and Flash - Water / Dust Resistant IP64 Rated TL 6.0 - 5 Ultra Bright LEDs - Up to 60 hours run time - Cost-effective, high-quality light - Super bright day time flash mode - 3 operating modes - Runs on AAA batteries - Water / Dust Resistant IP64 Rated

150 lumen headlight + amber side lights Great optics, abundant lumen output and amber side lights make Planet Bike's Blaze 150 SL a smart choice for the urban bike commuter. It features excellent run times from easily replaceable AA batteries and its 3 modes keep you seen both day and night. FL1 TESTED RUN-TIMES - 4.8 hrs (high – 150 lm), 11 hrs (low - 70 lm) and up to 62 hrs (Superflash - 150 lm) LIGHT PATTERNS - Cree XP-E2 LED provides high and low power beam along with Superflash patterns REPLACEABLE BATTERY - 2 AA batteries (included) SAFETY SIDE LIGHTING - Amber side lights provide 275° of visibility FL1 RATED WATER RESISTANCE - Water resistance rated to IPX6 standard SPECS - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 5 hrs (high – 150 lm), 12 hrs (low - 70 lm) and up to 64 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

Front Compact, durable cycling light with a machined aluminum body. It features built-in cooling fins and cutouts for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes—including a Daytime Flash mode. Runtime has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handle bar shapes and sizes. - Max 500 lumens / 20 hour runtime in Femto mode - New housing with stylized heat dissipation fins - Silicone rubber strap - IPX7 water resistant - Integrated USB stick for cable-free recharging Rear - Max 30 lumens - USB Rechargeable and magnetic clip-on mount - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Slim design, lightweight and durable - Magnetic clip-in mount - IPX7 water resistant

The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable