Parts & Accessories

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

Protective Silicone case for Edge 1040 and 1040 Solar

Silicone Case for Edge 540/840

Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

SL Range Extender Cable 285mm MTB

Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status

Our top-selling wireless sport headphones formerly known as Aeropex now come with new packaging, a quick-charge feature, and a new name. OpenRun are our lightest headphones to date and are engineered with outstanding sound, a long-lasting battery, and Quick Charge to keep you aware and motivated while you power through any workout. - 8th Generation Bone Conduction Technology - IP67 Waterproof (Not for swimming) - Lightweight + Comfortable - 8-Hour Battery Life + Quick Charge

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance

Our top-selling wireless sport headphones formerly known as Aeropex now come with new packaging, a quick-charge feature, and a new name. OpenRun are our lightest headphones to date and are engineered with outstanding sound, a long-lasting battery, and Quick Charge to keep you aware and motivated while you power through any workout. - 8th Generation Bone Conduction Technology - IP67 Waterproof (Not for swimming)  - Lightweight + Comfortable - 8-Hour Battery Life + Quick Charge

Wheel magnet for all CatEye cycle computers

The Elite heart rate uses last generation wireless ANT+ and Bluetooth® Smart to synchronize your heart rate to the Elite My E-Training App and to all the compatible apps without the need of an adapter for your smartphone/tablet. Compatible Systems: - Compatible with iPhone 4s version and higher - Compatible with iPad 3 version and higher - Compatible with iPod Touch 5th generation and higher - Compatible with all the Android phones/tablets with 4.3 OS and higher and with 4.0 Bluetooth version - Compatible with all Bluetooth Smart Ready devices - Not compatible with Real Software. - Not compatible with console Supercrono Forte ANT+, Arion Digital ANT+, Qubo Digital ANT+. - Compatible with all the Elite home trainer only if used with My E-Training app or others app/software/ devices that support the Bluetooth Smart protocol - Replaceable battery and washable band

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Bosch Aftermarket Kit Smartphone Hub, with 1500mm DU-cable, Universal Mount and Compact Remote and Mounting Parts. The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence, and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6mph

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

Connect your PC to CycleOps VirtualTraining.

Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Fitting the V4 internal interface to the frame requires 1 cabling from the interface to the Erogopower controls - 900mm from the interface unit to the splitter - 800mm from the splitter to the Ergopower controls

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Can be fit to the right-hand side (only on the right-hand side) of compatible handlebars or on the down tube of compatible frames - 2 connectors on the rear side - one to connect to the power unit (gray), and one to connect to the Ergopower controls (orange) - FD/Shifter Compatibility: EPS

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Bosch SmartphoneHub USB Cap, For protecting the bearing L1 und L3 on the drive unit. The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories. Benefits: - Positions your computer for easy viewing in road or aero riding positions - Stays attached to your bicycle when aerobars are removed Details: - Provides two mounting heights and 3 positions to fine tune your computer's position - Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips - Includes all necessary mounting hardware

Protect your Edge 1030 with this form-fitting, removable silicone case.

- USB-A Edge Power Mount Cable - 400mm

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

Stay ahead of the pack with this extended out-front bike mount that lets you take full advantage of your Edge without compromising your ride. This mount with extended arm allows you to stay in a comfortable heads-up position for easier monitoring and improved safety.

• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams

- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless

It’s got your back while you ride ahead. Varia™ eRTL615 rearview radar for eBikes is our first battery-free radar. It plugs directly into your compatible eBike. It detects cars approaching from behind and provides audible and visible alerts when paired with your compatible Garmin smartwatch, bike computer or even your smartphone with the Varia™ app. This radar also has a bright tail light to make you more visible to motorists, adding peace of mind to every ride. And since you don’t have to charge it between rides, that’s one less thing to worry about.

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

Seamlessly connected. This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike. Highlights: - Fits most smartphone cases - Includes Intellimount adapter, adhesive mount and stand tool - Compatible with all SP products

• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.

Garmin's ANT+ USB stick plugs into your computer's USB port to wirelessly transmit your activities to Garmin Connect and Garmin's Training Center. It automatically receives your activity data when your compatible ANT+ Garmin device is within range.

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

With the new FAZUA 12V Car Charger, the FAZUA Battery 250 and 250 X can now also be conveniently charged in the car while on the move. For the power supply, the 12V Car Charger can be connected either to a suitable on-board power socket (in accordance with DIN ISO 4165) or to a cigarette lighter. - Charging time 3-4 hours - For Battery 250 and 250X

With an extra battery on board, you have the flexibility to extend your ride. The FAZUA Battery Bag was developed in cooperation with the experts from evoc for carrying the FAZUA 250 and 250x battery. It attaches to the frame with a few simple straps. The three fixation points hold it tightly to the frame preventing sway and bouncing. - Carries all available batteries of the FAZUA Ride 50 Evation product family and additional gear - Hypalon reinforcement material protects the frame and internal padding protects the battery - Two straps with buckles and a 3rd with hook and loop fastener securely hold the back to the frame - Highly abrasion-resistant and water repellent material with roll closure keeps the battery secure - Welded seams and water-repellent tape construction Specifications: - Number of Compartments: 1 - Top Tube Length: 12.2-inches - Seat Tube Length: 3.2-inches - Width: 3.2-inches - Volume (In3): 79 - Volume (L): 1.3 - Total Volume: 80 - Primary Material: 10% Polyester/ 70% TPU/ 20% Nylon - Weight: 140 - Waterproof: No

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded